Delta Electronics VFD-E manual MO1, Mcm, Avi, Acm, Aci, Afm

			Chapter 2 Installation and Wiring
Terminal	Terminal Function		Factory Settings (NPN mode)
Symbol				ON: Connect to DCM
			Maximum 48VDC, 50mA
			Refer to Pr.03.01 for programming
			MO1-DCM		Max: 48Vdc
					50mA
MO1	Multi-function Output 1				Mo1
	(Photocoupler)
					MCM
				internal circuit
MCM	Multi-function output common		Common for Multi-function Outputs
+10V	Potentiometer power supply		+10VDC 3mA
	Analog voltage Input		Impedance:		47kΩ
	+10V	AVI circuit	Resolution:		10 bits
			Range:		0 ~ 10VDC =
AVI	AVI				0 ~ Max. Output Frequency
					(Pr.01.00)
	ACM		Selection:		Pr.02.00, Pr.02.09, Pr.10.00
			Set-up:		Pr.04.11 ~ Pr.04.14, 04.19~04.23
	internal circuit
ACM	Analog control signal		Common for AVI, ACI, AFM
	(common)
	Analog current Input		Impedance:		250Ω
	ACI	ACI circuit	Resolution:		10 bits
			Range:		4 ~ 20mA =
ACI					0 ~ Max. Output Frequency
					(Pr.01.00)
			Selection:		Pr.02.00, Pr.02.09, Pr.10.00
	ACM	internal circuit	Set-up:		Pr.04.15 ~ Pr.04.18
	Analog output meter		0 to 10V, 2mA
	ACM circuit		Impedance:		100kΩ
		AFM
AFM			Output current		2mA max
		0~10V	Resolution:		8 bits
		potentiometer
		Max. 2mA	Range:		0 ~ 10VDC
	internal circuit	ACM	Function:		Pr.03.03 to Pr.03.04

NOTE: Control signal wiring size: 18 AWG (0.75 mm2) with shielded wire.

Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11 2-19