Delta Electronics VFD-E manual Parameter Explanation Settings Factory Customer

		Chapter 4 Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
		17: Parameter lock enable
		18: Operation command selection (external
		terminals)
		19: Operation command selection(keypad)
		20: Operation command selection
		(communication)
		21: FWD/REV command
		22: Source of second frequency command
		23: Run/Stop PLC Program (PLC1) (NOT for
		VFD*E*C models)
		23: Quick Stop (Only for VFD*E*C models)
		24: Download/execute/monitor PLC Program
		(PLC2) (NOT for VFD*E*C models)
		25: Simple position function
		26: OOB (Out of Balance Detection)
		27: Motor selection (bit 0)
		28: Motor selection (bit 1)
		Bit0:MI1
		Bit1:MI2
		Bit2:MI3
		Bit3:MI4
		Bit4:MI5
		Bit5:MI6
	Multi-function Input	Bit6:MI7
04.09		Bit7:MI8	0
	Contact Selection
		Bit8:MI9
		Bit9:MI10
		Bit10:MI11
		Bit11:MI12
		0:N.O., 1:N.C.
		P.S.:MI1 to MI3 will be invalid when it is 3-
		wire control.
	Digital Terminal
04.10	Input Debouncing	1 to 20 (*2ms)	1
	Time
04.11	Min AVI Voltage	0.0 to 10.0V	0.0
04.12	Min AVI Frequency	0.0 to 100.0%	0.0

Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11 4-13