Delta Electronics VFD-E manual Parameter Explanation Settings Factory

Chapter 4 Parameters

Parameter	Explanation	Settings	Factory	Customer
			Setting
	Motor PTC
07.14	Overheat Protection	0.1~10.0V	2.4
	Level
	Motor PTC
07.15	Overheat Warning	0.1~10.0V	1.2
	Level
	Motor PTC
07.16	Overheat Reset	0.1~5.0V	0.6
	Delta Level
	Treatment of the	0: Warn and RAMP to stop
07.17	Motor PTC	1: Warn and COAST to stop	0
	Overheat	2: Warn and keep running
07.18	Motor Rated Current	30 %FLA to 120% FLA	FLA
	(Motor 1)
07.19	Motor No-Load	0%FLA to 99% FLA	0.4*FLA
	Current (Motor 1)
	Torque
07.20	Compensation	0.0 to 10.0	0.0
	(Motor 1)
	Slip Compensation
07.21	(Used without PG)	0.00 to 10.00	0.00
	(Motor 1)
07.22	Motor Line-to-line	0~65535 mΩ	0
	Resistance R1
	(Motor 1)
07.23	Motor Rated Slip	0.00 to 20.00 Hz	3.00
	(Motor 1)
07.24	Motor Pole Number	2 to 10	4
	(Motor 1)
07.25	Motor Rated Current	30 %FLA to 120% FLA	FLA
	(Motor 2)
07.26	Motor No-Load	0%FLA to 99% FLA	0.4*FLA
	Current (Motor 2)
	Torque
07.27	Compensation	0.0 to 10.0	0.0
	(Motor 2)
	Slip Compensation
07.28	(Used without PG)	0.00 to 10.00	0.00
	(Motor 2)

4-20 Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11