Delta Electronics VFD-E manual Parameter Explanation Settings Factory Customer

Chapter 4 Parameters

Parameter	Explanation	Settings	Factory	Customer
			Setting
		10: Current exceeds 2 times rated current
		during decel.(ocd)
		11: Current exceeds 2 times rated current
		during steady state operation (ocn)
		12: Ground fault (GFF)
		13: Reserved
		14: Phase-Loss (PHL)
		15: Reserved
		16: Auto Acel/Decel failure (CFA)
06.10	Third Most Recent	17: SW/Password protection (codE)
	Fault Record	18: Power Board CPU WRITE failure (cF1.0)
		19: Power Board CPU READ failure (cF2.0)
		20: CC, OC Hardware protection failure
		(HPF1)
06.11	Fourth Most Recent	21: OV Hardware protection failure (HPF2)
	Fault Record	22: GFF Hardware protection failure (HPF3)
		23: OC Hardware protection failure (HPF4)
		24: U-phase error (cF3.0)
		25: V-phase error (cF3.1)
06.12	Fifth Most Recent
	Fault Record	26: W-phase error (cF3.2)

27:DCBUS error (cF3.3)

28:IGBT Overheat (cF3.4)

29:Power Board Overheat (cF3.5)

30:Control Board CPU WRITE failure (cF1.1)

31:Control Board CPU WRITE failure (cF2.1)

32:ACI signal error (AErr)

33:Reserved

34:Motor PTC overheat protection (PtC1) 35-39: Reserved

40:Communication time-out error of control board and power board (CP10)

4-18 Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11