Delta Electronics VFD-E manual MO2/RA2, MO3/RA3, MO4/RA4, MO5/RA5, MO6/RA6, MO7/RA7

		Chapter 4 Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
		0: No function
11.00	Multi-function	1: AC drive operational	0
	Output Terminal	2: Master frequency attained
	MO2/RA2
		3: Zero speed
		4: Over torque detection
11.01	Multi-function	5: Base-Block (B.B.) indication	0
	Output Terminal	6: Low-voltage indication
	MO3/RA3
		7: Operation mode indication
		8: Fault indication
11.02	Multi-function	9: Desired frequency 1 attained
	Output Terminal	10: Terminal count value attained	0
	MO4/RA4
		11: Preliminary count value attained
		12: Over Voltage Stall supervision
11.03	Multi-function	13: Over Current Stall supervision	0
	Output Terminal	14: Heat sink overheat warning
	MO5/RA5
		15: Over Voltage supervision
		16: PID supervision
	Multi-function	17: Forward command	0
11.04	Output Terminal
		18: Reverse command
	MO6/RA6
		19: Zero speed output signal
		20: Warning(FbE,Cexx, AoL2, AUE, SAvE)
	Multi-function	21: Brake control (Desired frequency	0
		attained)
11.05	Output Terminal
	MO7/RA7	22: Drive ready
		23: Desired frequency 2 attained
		0: No function	0
11.06	Multi-function Input	1: Multi-Step speed command 1
	Terminal (MI7)
		2: Multi-Step speed command 2
11.07	Multi-function Input	3: Multi-Step speed command 3	0
	Terminal (MI8)	4: Multi-Step speed command 4

Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11 4-27