Delta Electronics VFD-E manual Up/Down

Chapter 4 Parameters

Parameter	Explanation	Settings	Factory	Customer
			Setting
		2: Disable. Operation status will change if
		operation command source Pr.02.01 is
		changed.
		3: Enable. Operation status will change if
		operation command source Pr.02.01 is
		changed.
		0: Decelerate to 0 Hz
02.06	Loss of ACI Signal	1: Coast to stop and display “AErr”	1
	(4-20mA)
		2: Continue operation by last frequency
		command
		0: by UP/DOWN Key
02.07	Up/Down Mode	1: Based on accel/decel time	0
		2: Constant speed (Pr.02.08)
		3: Pulse input unit (Pr.02.08)
	Accel/Decel Rate of
	Change of
02.08	UP/DOWN	0.01~10.00 Hz	0.01
	Operation with
	Constant Speed
		0: Digital keypad UP/DOWN keys or Multi-
		function Inputs UP/DOWN. Last used
		frequency saved.
	Source of Second	1: 0 to +10V from AVI
02.09		2: 4 to 20mA from ACI or 0 to +10V from	0
	Frequency
	Command	AVI2
		3: RS-485 (RJ-45)/USB communication
		4: Digital keypad potentiometer
		5: CANopen communication
	Combination of the	0: First Master Frequency Command
		1: First Master Frequency Command+
02.10	First and Second		0
		Second Master Frequency Command
	Master Frequency
		2: First Master Frequency Command -
	Command
		Second Master Frequency Command
02.11	Keypad Frequency	0.00 to 600.0Hz	60.00
	Command
02.12	Communication	0.00 to 600.0Hz	60.00
	Frequency
	Command

4-8 Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11