Delta Electronics VFD-E manual Group 7 Motor Parameters Explanation Settings Factory

Chapter 4 Parameters

Parameter	Explanation	Settings	Factory	Customer
			Setting

04.25Reserved

Group 7 Motor Parameters

Parameter	Explanation	Settings	Factory	Customer
			Setting
	Torque
07.08	Compensation Time	0.01 ~10.00 Sec	0.30
	Constant
Group 9 Communication Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
09.12	Reserved
09.13	CANopen	0: disable	1
	Communication	1: 1 to 127
	Address
		0: 1M
		1: 500K
09.14	CANbus Baud Rate	2: 250K	0
		3: 125K
		4: 100K
		5: 50K
09.15	Gain of CANbus	0.00~2.00	1.00
	Frequency
		bit 0 : CANopen Guarding Time out
		bit 1 : CANopen Heartbeat Time out
		bit 2 : CANopen SYNC Time out
09.16	CANbus Warning	bit 3 : CANopen SDO Time out	Read-
		bit 4 : CANopen SDO buffer overflow	only
		bit 5 : CANbus Off
		bit 6 : Error protocol of CANopen
		bit 7 : CANopen boot up fault
Group 11 Parameters for Extension Card

4-156 Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11