Delta Electronics VFD-E manual 04.27

Chapter 4 Parameters

Weights										0=Active
Bit	0	0	1	1	1	0	1	0	0	1=Off
										MI1
										MI2
										MI3
										MI4
										MI5
										MI6
										MI7
										MI8
										MI9

When extension card is installed, the number of the multi-function input terminals will increase according to the extension card. The maximum number of the multi-function input terminals is shown as follows.

												0=Active
Weights												1=Off
Bit	11 10	9	8	7	6	5	4	3	2	1	0	MI1
												MI2
												MI3
												MI4
												MI5
												MI6
												MI7
												MI8
												MI9
												MI10
												MI11
												MI12

04.27	Internal/External Multi-function Input Terminals Selection		Unit: 1
	Settings	0 to 4095	Factory Setting: 0
	This parameter is used to select the terminals to be internal terminal or external terminal. You
	can activate internal terminals by Pr.04.28. A terminal cannot be both internal terminal and
	external terminal at the same time.
	For standard AC motor drive (without extension card), the multi-function input terminals are
	MI1 to MI6 as shown in the following.

Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11 4-85