Delta Electronics VFD-E manual Parameters

		Chapter 4 Parameters
Group 13: PG function Parameters for Extension Card
Parameter	Explanation	Settings	Factory	Customer
			Setting
		0: Disabled
13.00	PG Input	1: Single phase	0
		2: Forward/Counterclockwise rotation
		3: Reverse/Clockwise rotation
13.01	PG Pulse Range	1 to 20000	600
13.02	Motor Pole Number	2 to 10	4
	(Motor 0)
13.03	Proportional Gain	0.0 to 10.0	1.0
	(P)
13.04	Integral Gain (I)	0.00 to 100.00 sec	1.00
	Speed Control
13.05	Output Frequency	0.00 to 100.00Hz	10.00
	Limit
13.06	Speed Feedback	0 to 9999 (*2ms)	500
	Display Filter
	Detection Time for	0.0: disabled
13.07	Feedback Signal		1
		0.1 to 10.0 sec
	Fault
	Treatment of the	0: Warn and RAMP to stop
13.08	Feedback Signal	1: Warn and COAST to stop	1
	Fault	2: Warn and keep operation
13.09	Speed Feedback	0 to 9999 (*2ms)	16
	Filter
13.10	Source of the High-	0: PG card	Read
	speed Counter	1: PLC (NOT for VFD*E*C models)	Only

Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11 4-31