Delta Electronics VFD-E manual =Off, MI3 MI4 MI5 MI6

Chapter 4 Parameters

04.24The Digital Input Used by PLC (NOT for VFD*E*C models)

Settings	Read Only	Factory setting: ##
Display	Bit0=1: MI1 used by PLC
	Bit1=1: MI2 used by PLC
	Bit2=1: MI3 used by PLC
	Bit3=1: MI4 used by PLC
	Bit4=1: MI5 used by PLC
	Bit5=1: MI6 used by PLC
	Bit6=1: MI7 used by PLC
	Bit7=1: MI8 used by PLC
	Bit8=1: MI9 used by PLC
	Bit9=1: MI10 used by PLC
	Bit10=1: MI11 used by PLC
	Bit11=1: MI12 used by PLC

For standard AC motor drive (without extension card), the equivalent 6-bit is used to display the status (used or not used) of each digital input. The value for Pr.04.24 to display is the result after converting 6-bit binary into decimal value.

Weights							0=not used
Bit	5	4	3	2	1	0	1=used by PLC
							MI1

MI2

MI3

MI4

MI5

MI6

For example: when Pr.04.24 is set to 52 (decimal) = 110100 (binary) that indicates MI3, MI5 and MI6 are used by PLC.

Weights							0=OFF
							1=ON
Bit	1	1	0	1	0	0	MI1
							MI2
							MI3
							MI4
							MI5
							MI6

4-82 Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11