Fujitsu M10-4, M10-4S - page 130

A
2. Loosenthe two screws holding the upper rear side of the CPU memory unit
lower.Then, remove the rear co ver (A in the figure) by pulling it in the
directionof the ar row.
Figure7-22 Removing the rear cover
3. Remove theXSCF board.
-For the SPARC M10-4 with a FRAME-A CPU memory unit
Removethe three screws fixing the XSCF board (A in the figure) and rear
cover. Tilt the right lever of the XSCF mount with your fingers about 5 mm (0.2
in.)to the r ight (B in the figure). Lift up the right side of the XSCF board and
releaseth e connection of the connector (C in the figure).
FujitsuM10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･December 2013106