Fujitsu M10-4, M10-4S - page 296

Note- Ma ke a note of the positions of the power supply units before removing them to
ensurethat they arereinstalled correctly .
Note- Make a note of the locations of the fan units before removing them to ensure that they
arereinstalled correctly .
Note- Ma ke a note of the positions of the internal disks before removing them to ensure that
theyare reinst alled correctly.
6. Loosenthe screw securing the CPU memory unit and then lower the right and
leftle vers to the horizontal position.
Figure14-3 Screw securing the CPU memory unit
7. Pullthe CPU memory unit out by about 10 cm (3.9 in.)
8. Remove thef rontco ver.
For details, see "5.5.3 Removingthe front cover."
9. Removeal l the powersupply units.
For details, see "10.4 Removinga Power Supply Unit."
10. Removeall the fan units.
For details, see "11.4 Removinga Fan Unit."
11. Removeall the internal disks or the HDD filler units.
For details, see "12.4 Removing an Internal Disk."
12. Loosenthe two screws in the fan slot and then remove the fan shelf.
FujitsuM10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･December 2013272