Note- In the case of a d ual power feed, connect the power cords in their original positions by
referringto th ere cord that you made before the start of maintenance.
For details, see "19.5.1 Installing a fan unit."
6. Install thef rontco ver of the crossbarbox.
For details, see "6.5.3 Installingth e front cover."
23.6 Restoring the System
Thissectio n describes the procedure for restoring the system after installing the
operation panel.
1. Connect all the power cords to the power supply unit of the crossbar box
requiringmaintenance.
For details, see "6.5.1 Installingth e power cord."
2. Returnto the operation of theXSCF firmware replacefru command to confirm
thatthe operation panel has been incorporated into the system.
For details, see "6.1 Incorporating an FRU into the System with the replacefru
Command."
3. Poweron all the physical partitions.
Fordetails, see "6.3 Powering On the Phys ical Partition Requiring Maintenance."
4. Closethe rack door.
FujitsuM10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･December 2013378