XSCF> showlogs error
Note- When you addor remove CPU memory units, confirm that no error has occurred.
XSCF> replacefru
Note- In the case of a d ual power feed, make a note of the locations of the power cords
beforedisconn ecting them to ensure that they are reinstalled correctly.
Note- Whe n the CPU memory unit lower is replaced, all of the XSCF setting information
maybe lost. Perfor mt his operation only after backing up the XSCF setting information.
1. Open the rack door.
2. Logi n to the XSCF shell.
3. Executethe showlogs command to identify the component requiring
maintenance.
For details, see "3.3.5 Checking log information."
4. Confirmthe hardware and software configurations.
For details, see "4.2 Confirmingthe System Configuration."
5. Poweroff the physical partition requiring maintenance.
Fordetails, see "5.3 Powering Off the Physical Partition Requiring Maintenance."
6.
Executethe replacefru command to release the chassis requiring maintenance
fromthe system.
For details, see "5.1 Releasing an FRU from the System with the replacefru
Command."
7. Removeal l the powercords from the PSU backplane unit of the chassis
requiringmaintenance.
For details, see "5.5.2 Removing the power cord."
7.3.3 System-stopped maintenance
1. Open the rack door.
2. Logi n to the XSCF shell.
3. Executethe dumpconfig command to backup the XSCF setting information
onlywhen replacing the CPU memory unit lower in a singe-chassis
configuration.
For details, see "10.9.2 Saving XSCF setting information" in the Fujitsu
M10/SPARCM10 Systems System Operation and Administration Guide.
FujitsuM10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･December 201390