XSCF> version -c xcp
Table4-4 Systemconf iguration
Configuration Description
Single-chassisco nfiguration Configuration in which a single SPARC M10-4 is used
Buildingb lock configuration Configuration in which 2 or more SPARC M10-4S's are
combinedan d used
1. Logi n to the XSCF shell.
2. Executethe ve rsioncommand to determine the firmware ve rsion information.
Inthe following exa mple,"-c xcp" is entered to determine the overall XCP version.
4.3 Understanding Types of Maintenance
Thissectio n explains the types of maintenance.
Thesing le-chassis configuration and building block configuration denote the
followingsystem configurations.
There are the following five types of maintenance.
■Active/hot maintenance
Maintenancework is performed while the physical partition remains turned on
andthe in put power to the chassis in which the target Field Replaceable Unit
(FRU)is mounted is on (power cord is connected). Active/hot maintenance can be
performedonly on FRUs that have a redundant configuration or which support
PCIh ot plugging (PHP).
FujitsuM10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･December 201344