Figure5-1 Locations of screws holding the cable support
2. Lowerthe cable support.
5.5.2 Removing the power cord
Whenremoving the power cord of the SPARC M10-4S or the crossbar box to perform
maintenancework on a component, do so only after removing the cable clamp from
thepower cord.
1. Releasethe latch (A in the f igure) of the cable clamp.
Pulling the cable clamp toward the rear of the chassis facilitates release of the
latch.
Chapter5 Understandingthe Preparations for Enabling Maintenance 65