Note- Co nfirm that the clip of the memory slot has returned to its origin al position.
Figure8-5 Removing memory
8.6 Installing Memory
Thissection describes the procedure for installing a memory module. Perform
expansion using the same procedure.

8.6.1 Installing memory

1.
Placet he memorymo dule by aligning the notched section with the corresponding
partof the memory slot connector.
2. Pushthe memory module into the slot evenly.
FujitsuM10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･December 2013174