#grep " 0 \"ixgbe"\" /etc/path_to_inst
"/pci@8100/pci@4/pci@0/pci@0/network@0" 0 "ixgbe"
#ldm list-bindings rootdom
------------------------Ommitted------------------------
VDSNAME VOLUME OPTIONS MPGROUP DEVICE
vds0 vol0 /export/
vdisks/vdisk.img (*1)
vol1 /dev/zvol/
dsk/rpool/zvdisk1vol2 /dev/dsk/
cxtxxxxxxxxxxxxxxxxdxsx
CLIENT VOLUME
vdisk1@guest1 vol0 (*2)
vdisk2@guest2 vol1
vdisk3@guest3 vol2
------------------------Ommitted-----------------------
c. If the virtual network switch to which the PCIe card requiring maintenance
isassigned is found in steps a and b, see the [PEER] part of the virtual
networkswitch displayed in step a. Confirm thepart for thevi rtual network
device andguest domain that use the serv ices of the virtual network
switch.
Thedispl ay format is "<virtual network device>@<guest domain>."
- For SAS card or FibreChannel card
a. Executethe ldm list-bindings command from the control domain to check
virtualdisk service [VDS] information for the virtual disk backend
([DEVICE]v alue) that is assignedto the v irtual disk service.
For information on the types that can be assigned to a virtual disk backend,
see"Virtu al Disk Backend" in the Oracle VM Server for SPARC Administration
Guide.
Inthe following example, "rootdom", the logical domain name to which the
PCIec ard is assigned, is specified.
*1: Virtual disk backend
*2: Virtual disk name and guest domain n ame to which the backend of vol0 is
assigned
b. Login to the logical domain to which the PCIe card is assigned to identify
thephysical disk from the backend. Then, identify the PCIe card in use
fromthe physical disk.
Fordetails of the procedure, see documents for the software that manages
respectivefile sy stem and volume.
For example, suppose that the backend is a file on the ZFS file system. In this
case, execute the zfs list command to confirm the ZFS storage pool corresponding
tothe mount point of the directory in which the file is located. Then, execute
zpoolstatus <zpool name>toconfirmthephysicaldevicepathofthePCIecard
tow hich a LU or hard disk is connected.
FujitsuM10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･December 2013248