Note - When mountinga CPU memory unit, check the connectors on both of the
chassisand CPU memory unit beforehand to confirm that no pin is bent and all the
pinsareneatlyarrangedinlines.Ifthereisabentpininaconnector,mountinga
CPUmemory unit may damage the chassis or CPU memory unit. Also, carefully
proceed with the work to prevent any pin from being bent.
Note- A part o ft he procedure varies depending on the CPU memory unit type. To
determinethe C PU memory unit type, check the label in Figure 7-2.
Figure7-43 Removing the PCIe cables (with the connector for one PCIe cable
facing the outside and the other two facing the front of the CPU
memoryunit)
7.5 Installing a CPU Memory Unit
Thissectio n describes the procedure for installing a CPU memory unit.
Unlessothe rwise specified, the figures explained in this section use the SPARC
M10-4Swith a FRAME-A CPU memory unit.

7.5.1 Installing a PCI Express cable

FujitsuM10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･December 2013124