Table2-12 LEDon the power s upply unit and its status (SPARC M10-4/M10-4S and
crossbar box)
Name Color Status Description
CHECK Green On Indicatesthat the input power is turned on
andpower is being s upplied normally.
Blinking (*) Indicatesthat the inputpower is b eing
disconnected.
Amber On Indicatesthat an err or has occurred.
Indicatesthat the in put power to this power
supplyunit isturned off inredundan t
operation.
Blinking (*) Indicatesa warning (Anerror has o ccurred
butthis power supplyunit isoperating).
Off Indicatesthat power is not being supplied.
*The blink interval is 1 second (1 Hz).
Table2-13 LEDson the PCIe card s lot and their statuses (SPARC M10-4/M10-4S)
Name Color Status Description
POWER Green On Indicates that power is being su pplied.
Off Indicatesthat power is not being supplied.
ATTENTION Amber On Indicates that an error has occurred.
Blinking(*) Indicates that the component requires
maintenance( This function is also referred to
asthe "locator").
Off Indicatesthe normal state.
*The blink interval is 1 second (1 Hz).
Table2-14 LEDson the internal disk an dth eirst atuses (SPARC M10-4/M10-4S)
Name Color Status Description
READY Green Blinking Indicatesthat the disk is being accessed. Th is
LEDis normally on, but it blinks while the
diskis being accessed.
Whilethe LED is blinking, maintenance work
suchas the removal of the disk cannot be
performed.
Off Indicatesthat maintenance work such as the
removalof th ed isk can be performed.
CHECK Amber On Indicatesthat anerror has occurred.
Blinking(*) Indicates that the component requires
maintenance( This function is also referred to
asthe "locator").
Off Indicatesthe normal state.
*The blink interval is 1 second (1 Hz).
FujitsuM10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･December 201328