Note- In the case of a d ual power feed, make a note of the locations of the power cords
beforedisconn ecting them to ensure that they are reinstalled correctly.
XSCF> showlogs error
XSCF> replacefru
Note- In the case of a d ual power feed, make a note of the locations of the power cords
beforedisconn ecting them to ensure that they are reinstalled correctly.
7. Remove all the power cords from the SPARC M10-4S power supply unit
requiringmaintenance.
For details, see "5.5.2 Removing the power cord."
25.3.2 System-stopped maintenance
1. Open the rack door.
2. Logi n to the XSCF shell.
3. Executethe showlogs command to identify the component requiring
maintenance.
For details, see "3.3.5 Checking log information."
4. Confirmthe hardware and software configurations.
For details, see "4.2 Confirmingthe System Configuration."
5. Poweroff all the physical partitions.
Fordetails, see "5.3 Powering Off the Physical Partition Requiring Maintenance."
6. Executethe replacefru command to release the SPARC M10-4S requiring
maintenancefrom the system.
For details, see "5.1 Releasing an FRU from the System with the replacefru
Command."
7. Remove all the power cords from the SPARC M10-4S power supply unit
requiringmaintenance.
For details, see "5.5.2 Removing the power cord."
25.4 Removing a Crossbar Cable (Optical)Thissectio n describes the procedure for removing the crossbar cables (optical).
FujitsuM10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ・December 2013394