TableC-4 netstat(1M)command options
Option Description Application
-i Displaysthe interface status. The
displayedconten t includes
informationon incoming and
outgoingpackets, incoming and
outgoing errors, collisions, and
queues.
Allowsyou t o view a concise
overviewof the networkstatus .
-iinterval Specifyinga numeric value after the
-ioption executes the n etstat(1M)
command at intervals of the
specifiednum ber of seconds.
Identifiesinterm ittent or long-term
networkevents .Y ou can view
nighttimeevents at a glance by
pipingthe netstat outputto a file.
-p Displaysthe media table. Allowsyou to check the MAC
addressesof the h ost on the
subnetwork.
-r Displays the routing table. Allowsyou to check the routing
information.
-n Convertsa host name into an IP
addressand then d isplays it.
Allowsyou to ch eck the IP address
insteadof the host name.
#netstat -p
Net to Media Table: IPv4
Device IP Address Mask Flags Phys Addr
------ -------------------- --------------- -------- ---------------
net0 4S-111-D0 255.255.255.255 SPLA b0:99:28:98:30:36
net0 10.24.187.1 255.255.255.255 00:0a:b8:50:cd:42
net0 224.0.0.22 255.255.255.255 S 01:00:5e:00:00:16
Net to Media Table: IPv6
If Physical Address Type State Destination/Mask
----- ----------------- ------- ------------ ---------------------------
net0 33:33:00:00:00:01 other REACHABLE ff02::1
net0 33:33:00:00:00:02 other REACHABLE ff02::2
net0 33:33:00:01:00:02 other REACHABLE ff02::1:2
net0 33:33:00:00:00:16 other REACHABLE ff02::16
net0 b0:99:28:98:30:36 local REACHABLE fe80::b299:28ff:fe98:3036
net0 33:33:ff:98:30:36 other REACHABLE ff02::1:ff98:3036
#

Thefoll owing example shows the netstat(1M) command output.

C.5 ping(1M) Command

Theping (1M) command sends the ICMP ECHO_REQUEST packet to network hosts.

FujitsuM10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･December 2013486