NEC nd-20292 manual Can be Routed Another

440.12Call Park

1.To Park a Call:

With an extension, CO/PBX/Tie/DID or conference call in progress:

lDepress the FLASH key (or momentarily depress the hookswitch) and receive second dial tone, (call is placed on Consultation Hold).

lDial Call Park Access Code (Default 4*).

lDial Call Park Location Number (O-9) Example: 0, receive confirmation tone.

OR

If the Call Park Location number dialed is busy (busy tone received):

lUse step calling to advance to an idle call park location.

Example: Dial 1, receive confirmation tone.

lRestore handset.

2.Retrieving a Call from Park:

lLift handset, and receive internal dial tone.

lDial Call Park Access Code (Default 4*).

lDial Call Park Location number (O-9) of the call to be retrieved; converse. If an idle Call Park location number is dialed, reorder tone will be heard.

ND-20292

CHAPTER 4

APRIL, 1990

NOTE 1: Any call left in Call Park for more than a pre-programmed interval will recall to the station which parked the call. This recall can be picked up by other stations in the system via

Directed Call Pickup. If you park a conference call or put a conference call on exclusive hold, you cannot retrieve another parked call and you cannot answer another recalling parked conference call.

NOTE 2: Two independent adjustable recall timers (conference and 2 party calls) are available for Call Park calls. This allows for parked conference outside parties to maintain a conversation without frequent recalls to the party that parked the call.

440.13Dial 0 For Attendant

lLift handset and receive internal dial tone.

lDial 0 to call the associated attendant.

NOTE:

When

the

associated

attendant

is

busy,

calls

to

the attendant

can be

routed.

to

another

attendant,

depending

upon system

programming.

If

the

associated

attendant

is

call

forwarded to

another

station,

calls

to

the attendant

will

be automatically

forwarded

to the station.

400 - 153