NEC nd-20292 manual TE Table Modify

ND-20292

CHAPTER 7

APRIL, 1990

NOTE 5: Selection of CHK(check) tells the LCR-E to look in an office code table for the central office code dialed by the user to determine whether to dial the digit 1 before dialing the number dialed by the user. It is required that an entry of an office code table number be made when this option is selected.

•Example of Service Area Check:

•Depress Space Bar:

NOTE 1: When the SRV AREA CHK entry is blank

(***)use of the Space Bar provides NO as the selected option.

NOTE 2: Repeated use of the Space Bar will cause the selected option to alternate between NO and CHK. The c arrow key should be used to position the cursor towards CHK, when alternating from CHK to NO.

NOTE 3: Selection of NO tells the LCR-E that no check of an office code table is necessary. This option is used when the number dialed by the user is being routed to a line which will p& use an OCC (Other Common Carrier). This option can also be selected if the OCC has no limitation relative to office code dialed by the user.

NOTE 4: Selection of CHK (check) tells the LCR-E to look in an office code table for the central office code which the user dialed to determine whether this number can be dialed via the selected route. This option is used to determine whether the selected route, to which the user is being routed, provides service to the specified office code area.

SAMPLE LCD INDICATIONS

1

.

TE TABLE MODIFY***

**

. ***

***

***

SRVAREACHK i NO

700 - 26