NEC nd-20292 manual Area Code ,,BL

A.Area Code Table Modify

With the Modify Menu displayed, depress 1, then depress CR (RETURN).

The computer loads the area code table data from the floppy disk and, when done, displays the Area Code Table Modify display as shown.

At this time, enter the tenant number for the area code assignments to be made. Depress a number l-3, then depress CR (RETURN).

NOTE: Although it is possible to enter 0 as a tenant number, this assignment has no function when used with the Electra Ma&II and will result in no operation or incorrect operation of the LCR.

Type in the area code to be assigned, then depress CR (RETURN). The example shows the display for selection of tenant 1 and area code 200.

Based on the area code dialed, the LCR determines which tables should be examined. The first decision that must be made is the type of table to be routed through. Two types of tables can be selected based on the area code. The first type is the weekly schedule tables. The second type is the route advance tables. Depress the Space Bar to select the type of table. The first depression of the Space Bar causes the display to show WEEKLY as the selected table type.

Depressing the Space Bar again selects ROUTE ADVANCE as the selected table type. After selecting the table type, depress the Cursor Down key to get to the Table No. line and enter the desired table number (for the table type selected). The example shows the selection of WEEKLY table number 10. A maximum of sixty four tables can be selected (00-63) for either WEEKLY or ROUTE ADVANCE.

Once the above steps are completed, two

options are available. If corrections are required, use the Cursor Up key to return to the line to be changed. If no changes to the data are required, depress the CR (RETURN) and the display increments to the next area code. Selection of a new area code can be made at this time or depress CR (RETURN).

ND-20292

CHAPTER 7

APRIL, 1990

SAMPLE LCD INDICATIONS

***AREA CODE TftBLE MODIFY***

TENANT NO. .

***AREA CODE T@BLf MODIFY***

TENANT NO.

AREACODE j 0

***AREA CODE ,,BL:			MODIFY***
TENANT	NO.
AREA CODE		i	200
TABLE	NAME	:	******
TABLE	NO.	:	**

***AREA CODE TABLE MODIFY***

TENANTNO. ? 1

AREA CODE ? 200

TABLE NAME : EEEKLY

TABLE NO. :

***AREA CODE TABLE MODIFY***

TENANTNO. ? 1

AREA CODE ? 200

TABLE NAME : WEEKLY

TABLE NO. : 10

700 - 39