NEC nd-20292 manual Panasonic Autodialer Connection

NEC AMERICA, INC.

BUSINESS SYSTEMS DlVlSlON

ET1 NUMBER: MK-002

DATE: MARCH, 1987

L’7.

PANASONIC AUTODIALER CONNECTION

1.DESCRIPTION

This Engineering Technical Information (ET11 Bulletin describes the steps necessary to install an ADA-E (Ancillary Device Adapter) unit into an ETE-GD-1, ETE-IGD-1, ETE-16K-1, or ETE-6-1 Multiline Terminal, to provide for connection and operation of a Panasonic Autodialer (Models KX-T1225/KX-T1235).

2.LIMITATIONS

2.1The dialer must be manually turned OFF after the call is established.

2.2The dialer cannot be used for intercom calls or for most functions requiring an access code

2.3The dialer bypasses both Toll Restriction and LCR

2.4The digits dialed, from the dialer, will not appear on the SMDR printout.

3.PARTS REQUIRED

3.1ADA-E Unit Adapter Kit (Stock # 700340).

3.2Panasonic Autodialer (KX-T1225/KX-T1235).

3.3l&l-35X modular jack.

3.4Eight small spade lugs.

3.5Approximately 7 feet of four conductor station wire cable; enough to reach from the Multiline Terminal to the W-35X.

3.6Electra Mark II Multiline Terminal.

4.OPERATION

4.1Access an idle CO/PBX line.

4.2On the Autodialer, depress the ON/OFF button; then depress the desired Speed Dial button.

4.3Monitor the call through the speaker of the Autodialer.

lof 6