NEC nd-20292 manual Testing, ET1 Number DT-004 Date January

ET1 NUMBER: DT-004

DATE: JANUARY 1989

NOTE: Two access panels are provided with the ADA-E kit; a narrow panel to be used with ETE-6-2 or ETE-16-2 Multiline Terminals and a wide panel to be used with all other terminals. Ensure the correct access panel is used.

4.14Route the locally provided station wire (already connected to the ADA-E unit) through one of the two notched grooves on the access panel. Install the access panel.

4.15Slide the directory back into place, ifrequired.

4.16Reinstall the handset and modular line cords onto the Multiline Terminal.

4.17Inert the l/8 mini plug and the 3/32 micro plug intotheir respective tape recorder jacks (See Figure 2).

4.18Plug the tape recorder into an AC power outlet; insert a tape cassette into the tape recorder and depress the RECORD and PLAY buttons simultaneously.

6.TESTING

5.1Establish a call using the handset. Speak in a normal voice and verify that the tape recorder is activated. With the handset still off-hook, remove the REMOTE plug from its jack, rewind the tape and verify that the recording took place (If the tape recorder is equipped with a recording level control the level may have to be adjusted).

5.2Reconnect the REMOTE plug and hang up the handset.

3of6