NEC nd-20292 manual Parts Required, NEC America, Inc Switching Terminals Division

NEC America, Inc.

Switching Terminals Division

-‘K& . -

‘“‘/////////////////////////////////////INFORMATION

DtermSERlES II

ET1 NUMBER: DT-002

DATE: DECEMBER 1988

PANASONIC AUTODIALER CONNECTION

1.DESCRIPTION

This Engineering Technical Information (ETI) Bulletin describes the steps necessary to install an ADA-E (Ancillary Device Adapter) unit into an ETE-6D-2, ETE-16D-2, ETE-16-2, or ETE-6-2 Multiline Terminal, to provide for connection and operation of a Panasonic Autodialer (Models KX-T1225/KX-T1235).

2.LIMITATIONS

2.1The dialer must be manually turned OFF after the call is established.

2.2The dialer cannot be used for intercom calls or for most functions requiring an access code

2.3The dialer bypasses both Toll Restriction and LCR.

2.4The digits dialed, from the dialer, will not appear on the SMDR printout.

3.PARTS REQUIRED

3.1ADA-E Unit Adapter Kit (Stock # 560280).

3.2Panasonic Autodialer (KX-T1225/KX-T1235).

3.3R&35X modular jack.

3.4Eight small spade lugs.

3.5Approximately 7 feet of four conductor station wire cable: enough to reach from the Multiline Terminal to the R.J- 35x.

3.6Dterm Series II Multiline Terminal.

1 of 6