NEC nd-20292 manual Keyboard Layout Number Keys l-9

ND-20292

CHAPTER 7

APRIL, 1990

l3S (t3ackSpace)/DEl_ete key

INSert/PASTe key

CTRL (CanTRoL) key

Figure 700-28 Keyboard Layout

1. Number Keys (l-9 and 01	SAMPLE LCD INDICATIONS
The number keys are used to enter data and to
select menu options as required.

2.CR (Carriage Return or Return)

The return key is used as an enter key during

programming. Normally this key will be depressed any time data is entered on the keyboard and after it is displayed on the screen. Shown below are some examples of the use of the CR key.

•To select a function from the main LCR menu, depress a number key and then depress CR RETURN).

•While in the DOWN LOAD, UP LOAD, VERIFY, or SYSTEM DATA CLEAR functions, a RETURN arrow (shown at right) is provided. At this time, depressing CR (RETURN) is required to return to the preceding menu display.

NOTE: When using an IBM/LCR disk, the

carriage return symbol (J 1 is represented by (CR).

***LCR MAIN MENU***

1 DOWN LOAD6 PRINT OUT

7 SYSTEM DATA CLEAR

s %%D
4 MODIFY	i
5 DISPLAY	10 SYSTEM CONTROL
ENTER MENU	NO.

AREA CODE TABLE DOWN LOAD START

NORMAL END d-J