NOTE% After the digits are properly displayed, depressing the return key will enter the data into the computer’s memory and increment the table number by one. Depressing the return key will now allow programming of the next table. Before depressing the return key a second time, the programmer can enter a new table number to be modified. When all extra code tables are assigned correctly, the use of the ESC key causes the data to be saved to the floppy disk and causes the display to return to the modify menu.

G.Office Code Table Modify

Whenever the option of either prefix check or service check is assigned in the route tables it is necessary to modify the office code tables for the LCR-E ETU to check and determine how the call is to be processed.

Note that 128 office code tables are made available, and that these 128 tables are used for both prefix check and service area check. Normally these tables are used for either one check or the other, not both.

The following procedure shows how to modify the office code tables as required. With the Modify Menu in the display, depress 7, then depress CR (RETURN). The display to the right is shown.

Enter the table number to be modified, then depress CR (RETURN). Available entries are 000-127. The example at right shows table 010.

Enter the office code number to be modified. Available entries are 200-999. The example at the right shows 201.

The display will appear as a grid showing the entry of 0 or 1 in the position for a maximum of fifty office codes, To the left of the grid is displayed the starting number for each row of the office codes. Across the top of the grid is provided columns O-9 which correspond to the last digit of the office code on any line.

ND-20292

CHAPTER 7

APRIL, 1990

SAMPLE LCD INDICATIONS

***OFFICE CODE TABLE MODIFY***

TABLE NO. ? 0

***OFFICE CODE TABLE MODIFY***

TABLE NO. 7 010

OFCCODE ? /-J

I

***OFFICE

CODE TABLE MODIFY***

TABLE NO.? 010

0123456789

OFCCODE1201 ;fJt ; P1 1 1 1 1 1 1 1 1 11111111

2201 1 1 1 1 1 1 1 1 1

2301 i 1 i 1 1 1 1 1 1

2401 1 1 1 1 1 1 1 1 1

700 - 47

Page 904
Image 904
NEC nd-20292 manual Office Code Table Modify Table NO. ?