NEC nd-20292 manual WY%54

6.Display

The Display option is used to allow the programmer to view the contents of the data presently in the floppy disk. This option does not allow changing of data, and is used only to confirm the present data.

6.Print Out

The Print Out option is used to send table data to a printer for purposes of having a hard copy. This option is recommended to be completed as the last step after veritication of proper LCR function, to obtain a hard copy of the LCR program.

The office code table can be printed as follows: with the PRINT OUT menu in

the display, depress r1 and ml

Enter the start table number and

depress ml . Example 001.

WY%54

Enter the end table number and

depress [?I . Example 002.

7.System Data Clear

The system data clear option is used to clear data from the tables. This option clears the data in the floppy disk, & the LCR-E ETU. The option is provided to clear only one table at a time.

8.System Control

The system control option is used to restart the LCR-E ETU. This option is recommended for use after any changes are made to the programming in the LCR-E.

750.9.2Command Descriptions

In general, commands from the main menu result in the display of a second menu (except for system control). This menu is a listing of the available tables. Programming is done on a per table basis.

ND-20292

CHAPTER 7

APRIL, 1990

SAMPLE LCD INDICATIONS

***OFFICE CODE TABLE PRINT***

TABLE NO. FROM

***OFFICE CODE TABLE PRINT***

TABLE NO. FROM 001

TO

***OFFICE CODE TABLE PRINT***

TABLE NO. FROM 001

I

SYSTEM DATA LOADING 0

I

OFFICE CODE TABLE PRINTOUT START q

700 - 35