NEC nd-20292 manual Areacode ? ml

Shown is the use of CR (RETURN) to increment the item number.

•With Area Code Table Modify in the display (as shown at right):

•Depress CR (RETURN) key.

•Depress CR (RETURN) again to display the contents (see Notes below).

•To return to the previous menu, depress the ESC key.

NOTE 1: After the first carriage return, the cursor is positioned at the new item number line. At this time a different item number may be chosen. If this is done before the carriage return, the data contents of the chosen item number will be displayed. This option applies to modify mode only.

NOTE2: The first CR (RETURN) increments the item number. The second CR (RETURN) displays the data for the item number.

750.9EXPLANATION OF LCR COMMANDS This section explains the LCR (RETURN) support terminal commands required to properly program the required data for operation of the LCR-E ETU. It is recommended that section 750.7 be fully read and understood before reading this section.

After the initialization procedure has been completed, powering up the programming computer results in display of the LCR Main Menu, (See section 750.5 for the initialization procedure if this has not been completed.) The LCR Main Menu provides the programmer with eight options.

ND-20292

CHAPTER 7

APRIL, 1990

SAMPLE LCD INDICATIONS

***AREA CODE TABLE MODIFY*** TENANT NO. 7 1

AREACODE 7 200 TABLE NAME : WEEKLY TABLE NO. : 01

***AREA CODE TABLE MODIFY*** TENANTNO. 7 1

AREACODE ? ml

***AREA CODE TABLE MODIFY*** TENANTNO. 1 1

AREACODE ? 201 ;;IWE ;$ME: q*****

-**

. .

700 - 33