NEC nd-20292 manual Route Advance

4.CursorKeys( t, 5_,+,+)

The cursor keys ( the 4 arrow keys at the right of side of the keyboard) are used to move the cursor, on the screen, in the respective direction of the arrow shown on the key. This key is mainly used during the MODIFY mode.

5.CTRL-X (Control key + X key)

The CTRL key and the X key, when depressed at the same time, are used to delete an entry during the MODIFY mode.

• Shown at right is a display when in the MODIFY mode.

• Depressing CTRL-X, clears the entry in the display. (When the ESC key is depressed this cleared entry is saved onto the disk in the disk drive.)

6.Space Bar

The Space Bar is used to select desired options when in the MODIFY mode. The following examples indicate the various options selected by the Space Bar.

• In Area Code Table Modify mode, the Space Bar is used to select between WEEKLY and ROUTE ADVANCE Table assignment for the displayed Area Code. Depressing it once selects WEEKLY.

•Depressing the Space Bar again will select

ROUTE ADVANCE.

NOTE 1: If the entry is blank (*****I, use of the Space Bar will display WEEKLY as the selected option.

NOTE 2: Repeated use of the Space Bar will cause the selected option to alternate between WEEKLY and ROUTE ADVANCE.

NOTE 3: Selection of WEEKLY tells the LCR-E processor to go look in the weekly schedule tables and then the Daily Schedule tables for the time of day and the route advance table to be referenced.

NOTE 4: Selection of ROUTE tells the LCR processor to immediately go to the route advance tables for further directions.

ND-20292

CHAPTER 7

APRIL, 1990

SAMPLE LCD INDICATIONS

	***AREA	CODE TABLE MODIFY***
TENANT NO.		;
AREA	CODE	:oo
;;;kE	;dME	f

: kzEEKLY

***ARE$CODE TABLE MODIFY***

TENANT NO.

AREA CODE i :oo

;~Xk~ ;‘JME : ******

:**

***AREA CODE TABLE MODIFY***

TENANTNO. ? 1

AREA CODE ? 200

TABLE NAME : KEEKLY

TABLE NO. :

***ARE$CO,DE TABLE MODIFY***

TENANT NO.

AREA CODE j 200

TABLE NAME : ROUTE ADVANCE

TABLE NO. : **

700 - 23