NEC nd-20292 manual 900

ND-20292

CHAPTER 9

APRIL, 1990

8.Enter item number (Example: 1) and press t(Return). Display shows:

<SYSTEM MEMORY DOWN LOAD >

DRIVE AND PATH = A:iABC\

- - - EXECUTING - - -

Upon completion of this procedure, the system will indicate “NORMAL END’. If there are any problems during this procedure, see Table 950-3 for a list of errors.

NOTE 1: When more than one it-emis selected by the Selection Mode (131, the display will show Execute, with or without Verify, for each item.

Example: If 1,2 is selected to be loaded, the screen will show Execute and Verify (for item l), then show Execute and Verify again (for item 2).

NOTE 2: When Down Loading with verify, if a Verify Error message appears, another message will appear informing you that you may be experiencing line or RAA problems. If this occurs, exit from the program and attempt another correction to the Electra Mark11System. (Refer to Table 950-3)

9.System Initialization

Enter an item number from the main Menu Display (Example: 31,press t(Return). Display shows:

<SYSTEM INUWLIZATION >

1.FIRSTINITIALIZATION

2.SECOND INITIALIZATION

ENTER MENU NO. OR HIT (ES0 TO RETURN TO MENU

10.For Local Operation

Enter item number (Example: 2), press *(Return) and (ESC).

The display will return to the Main Menu before the Initialization (First or Second) begins. If an attempt is made to perform another function (Down Load, Up Load, Initialization) before the Initialization is completed, the program will respond with a “OFF LINE BUSY” message. If this occurs, depress (ESC) to return to the Main Menu display.

For Remote Operation

Enter item number (Example: 21,press c (Return).

The modems will be disconnected

900 - 20