NEC nd-20292 manual Office Code Table Verify Start w

ND-20292

CHAPTER 7

APRIL, 1990

NOTE 1: The previous display is an example of area code data being verified between the floppy disk and the LCR-E ETU. The name of the selected table will be shown in the display.

NOTE 2: Exceptions to Note 1, are the office code table and all data verify selections. These are shown at right. These two selections, due to their large memory requirements, show darkened boxes to indicate the relative amount of data that has been transferred or verified.

NOTE 3: If no problem is encountered during verify, the display shown (or one similar to it) is provided. Depression of the CR (RETURN) key is required to return to the verify menu.

NOTE 4: If a problem is encountered during verify, the display shown (or one similar) is provided. Depression of the CR (RETURN) key is required to return to the verify menu.

NOTE 5: It is recommended that the RS232C cable between the LCR-E ETU and the computer be checked prior to performing a verify.

SAMPLE LCD INDICATIONS

OFFICE CODE TABLE VERIFY START w

AREA CODE TABLE VERIFY START

NORMAL END +-I

ABNORMAL END (OFFICE CODE TABLE)

4.Modify Mode

The modify mode is used to make changes to the LCR data base in the floppy disk. In this mode the programmer customizes the LCR program to accommodate the need of the system user. With the LCR Main Menu displayed, depress 4, then depress CR (RETURN). The Modify program is now loaded from the floppy disk. An example of the display is shown to the right.

The programmer is given the option to select the table to be modified. Only one table type can be modified a a time. The following pages provide an example of each table as it is being modified, and the associated displays provided by the computer. Before making any program changes, it is recommended that the programmer have a complete listing of all desired data clearly written down for easy reference while programming LCR.

***MODIFY***

1 AREA CODE TABLE 6 EXTRA CODE TABLE

2 WEEKLY SCHEDULER 7 OFFICE CODE TABLE

3 DAILY SCHEDULER 8 HOME NPA CODE

4 ROUTE ADVANCE

5 ROUTE TABLE ENTER MENU NO.

700 - 38