NEC nd-20292 manual ETI Number MK-017

ETI NUMBER: MK-017

6.3.1Determine the location for mounting the Viking PathFinder. Ensure that the desiqnated COI-E/EB ETU port iack and 12OVAC power source are nearbv.

6.3.2Install the COWEB ETU in an available interface slot (if a COI port is not already available).

6.3.3Insert a modular line cord with RJll connectors from the Telco connector of the PathFinder to incoming CO line port jack.

6.3.4Using a modular line cord with RJll connectors, connect a COI-E/EB ETU to the phone connector on the PathFinder.

6.3.5Using other modular line cords with RJl 1 connectors, connect a fax machine to the fax connector on the PathFinder and a modem to the modem connector on the PathFinder.

NOTE: These port can be used to connect other fax machines, modems, or data transmission devices.

6.3.6Plug the AC adaptor from the PathFinder to the 12OV AC power source.

6.4Electra Markll Programming

6.4.1No special programming is required for the Electra Markll. Upon installation of the COI-E/EB ETU, a trunk number is automatically assigned for the port representing the PathFinder.

6.4.2Refer to the Viking Technical Practice notes for programming the PathFinder to your particular application.

6.4.3Test the Viking PathFinder for proper operation with the Electra Markll.

3OF5