NEC nd-20292 manual 3of6

ET1 NUMBER: MK-002

DATE: MARCH, 1987

5.14Install the ADA-E unit and secure it to the terminal housing with the screw provided, as shown in Figure 2.

5.15Two access panels are provided with the ADA kit, the narrower panel is used with the ETE-6-1

Multiline

Terminal,

the wider panel

for all

other

Terminals.

Remove

the

plastic

tongue

on

the

underside

of

the access panel being installed

(using

a pair of

pliers) to provide

clearance

for

cables

in

the cable

exit

groove.

5.16Place the RJ-35X cable into the cable exit groove (Figure 2) making certain that all wires are inside

the terminal housing. Install the proper access panel.

5.17Reinstall the modular handset and modular line cords.

5.18If slid out of the way in step 5.4, slide the directory back into place.

5.19Plug the modular line cord of the Autodialer into the RJ-35X receptacle.

5.20Plug in the Autodialer AC Adapter, first into the Autodialer and then into the nearest AC outlet.

5.21Test both the Autodialer and the Multiline Terminal for proper operation.

3of6