ETI NUMBER: MK-019

5.3Initializing Repartee

5.3.1Configure Repartee Voice Mail System Enter Name of Enrolled Callers Enter Extension Numbers

Enter Personal Identifications Enter Voice Names

5.3.2Refer to the Repartee System Managers Manual for additional setup information.

5.4Electra Markll System Programming

5.4.1If the VMI-E ETU(s) is being added to an existing system in an interface slot previously occupied by a different type of ETU, it is necessary to assign the interface slot to be used for the VMI-E ETU in Memory Block 4Cl. (Refer to Chapter 3 of the Electra Markll Installation Service Manual.) Two VMI-E ETUscan be installed in the system when using a CPU-EC4 ETU.

5.4.2Up to four voice mail ports connected to the Repartee System can be programmed in the Voice Mail Hunt Group in Memory Block 2C4. (Refer to Chapter 3 of the Electra Markll Installation Service Manual.)

5.4.3In Memory Block 2B8, be sure that Line Keys l-4 are programmed as Voice Mail ports and Line Keys 9- 12 are programmed to send DTMF.

5.4.4Memory Blocks 488 and 489 will remain at default values for most cases; however, be aware that these timing parameters can be changed.

5.4.5A hunt group for the VMI ports may have to be programmed in Memory Blocks 3B5 to 3B8 depending on the customer site requirements.

5.4.6Station Speed Dial can be programmed to allow for easier access to the station users voice mailbox to retrieve messages and/or leave messages.

3OF4

Page 829
Image 829
NEC nd-20292 manual ETI Number MK-019