NEC nd-20292 manual Ogc, Icc, Otc, Itc

ND-20292

CHAPTER 2

APRIL, 1990

II

Figure 200-27 Mounting the RS-232C Connector

removed or inserted without powering down the ecu.

Switch DIP1 (see Figure 200-30 and Figure 200-

31)is a 7 position dip switch which is used to select baud rates in the range of 150 - 9600 (4800 is the recommended setting).

LED1 (Green) lit, indicates that the LCI+E ETU is receiving power.

2.Connection of LCR

A.The LCR-E ETU must be installed into either OPT1 or OPT2 or any combination slot of any

CCU. Prior to installation, ensure that switch SW1 is set to the ON position and that the baud rate switch DIP1 is set to the proper position.

When installing the LCR-E ETU, turn SW2 OFF for insertion of this ETU into the slot without powering down the CCU.

Month, Day, Year (8 characters1

Hour, Minute, AM or PM (7 characters)

Type of Call: OG, IC, OT, IT,OGC,ICC, OTC, ITC (2 or 3 characters) Station Number (3 or 4 characters)

00:1,5:32

1028;51~537000

“i”

Least Cost Routing (LCR) without account code

Number Dialed: Manually or Speed Dial (Max. 24 characters)

Call Duration: Hour, Minute, Second (8 characters)

Least Cost Routing (LCR) with account code

Forced Account Code (Max.

14 characters).

See Note

3.

NOTE

1:

A maximum

of 34 characters

can be printed

per

line.

NOTE

2:

Types

of calls

are

as follows:

OG:

Outgoing

Call

IC:

Incoming

Call

OT:

Transferred

Outgoing

Call

IT:

Transferred

Incoming

Call

OGC:

Conference

on Outgoing

Call

ICC:

Conference

on Incoming

Call

OTC:

Conference

on Transferred

Outgoing

Call

ITC:

Conference

on Transferred

Incomin

Call

NOTE

3:

An

‘“A” prior

to the Account

Code, is printed

only when

the Forced/Ver’ d led function

is provided in

the

system.

Figure

200-28

SMDR General

Format

of Call

Records

‘,- p

200-30