NEC nd-20292 manual Data

ND-20292

CHAPTER 7

APRIL, 1990

If a problem occurs during DOWN LOAD, UP LOAD, or VERIFY an error is displayed, as shown at right. Using the CR clears the display and returns it to the preceding menu.

Whenever MODIFY, DISPLAY, or PRINT OUT is used, the carriage return is depressed after making the entries for selection of desired data.

During MODIFY mode, CR (RETURN) is used to enter the selected data entries for a particular programming segment.

During DISPLAY or PRINT OUT mode, CR (RETURN) is used to request disnlav of additional data (in consecutive numerical order).

3.ESC - Escape Key

The ESC key is used to return to previous menu display any time a menu is displayed on the screen. Also, the ESC key is used in the MODIFY mode after completing the selection and/or entry of desired data.

0 Example of ESC key being used to go from the DISPLAY menu to the LCR main menu.

a Depress ESC key. Display shows:

0During MODIFY mode, use of the ESC key causes data to be saved to the disk drive and then returns the display to the MODIFY menu, as shown at right.

SAMPLE LCD INDICATIONS

AREA CODE TABLE DOWN LOAD START

ABNORMAL END

d-J

LINE TROUBLE

***AREA CODE TABLE MODIFY*** TENANT NO. 11

***ARE$CO,DE TABLE DISPLAY***

TENANT NO.

AREA CODE j 200

;;kIkE 1;“” :

:ZEEKLY

			***DOWN		LOAD***
AREA CODE TABLE					6 EXTRA CODE TABLE
2	WEEKLY		SCHEDULE		7 OFFICE CODE TABLE
3	DAILY	SCHEDULE
4	ROUTE		ADVANCE		t HoME NPA CoDE
5	ROUTE		TABLE	10 ALL		DATA
ENTER MENU NO.
			***LCR	MAIN MENU***
1	DOWN		LOAD6 PRINT		OUT
s	&l??D			7 SYSTEM		DATA CLEAR
				8
4 MODIFY
5 DISPLAY			1: SYSTEM			CONTROL
ENTER MENU NO.
SYSTEM		DATA SAVING				I

***MODIFY***

1 AREA CODE TABLE 6 EXTRA CODE TABLE

2 WEEKLY SCHEDULER 7 OFFICE CODE TABLE

3 DAILY SCHEDULER 8 HOME NPA CODE

4 ROUTE ADVANCE

5 ROUTE TABLE ENTER MENU NO.

700-22