NEC nd-20292 manual Attendant Activation and Deactivation of Delay Announcement

ET1 NUMBER: MK-012

DATE: DECEMBER 1988

7.1Render all extensions in the Hunt Group busy and call the pilot number of the DIT Hunt Group.

7.1.1Go off hook.

7.1.2Seize a trunk with either an access code or a line key.

7.1.3Dial the seven digit phone number of the Hunt Group.

7.2Do not answer’and note that the caller is provided with the pre-recorded announcement within the pre-programmed period of time. Establish that the recording repeats until the call is automatically terminated by the Delay Announcement Auto Release Timer (10 minutes).

7.3Render all extensions in the Hunt Group busy and make multiple simultaneous calls to the ilot number of the DIT Hunt Group (see 7.1- 7.1.3). Do not answer and note that aP1 callers are connected to the pre-recorded announcement. Answer each call and establish that the recording is released and normal conversations can ensue.

8.ATTENDANT ACTIVATION AND DEACTIVATION OF DELAY ANNOUNCEMENT

8.1To Activate Day/Night Time Delay Announcement: (Idle mode)

8.1.1Depress the CNF key.

8.1.2For Day Time Delay Announcement, depress line key 9 (LED turns ON)

8.1.3For Night Time Delay Announcement, depress line key 10 (LED turns ON)

8.1.4Depress the CNF key to return ON LINE.

8.2For deactivating Day time and Night time Delay Announcement, repeat the same procedure for activating the announcement, except turn the LEDs OFF instead of ON.

5of6