ETI NUMBER: OS-007
6.10 Following the pre molded guides inside the access panel cover assembly, route the four wires through the
cable exit groove. Refer to Figure 4.
.35X Cables
Figure 4. Modular Jack RJ-35X Cable Exit Groove on Dterm II Telephone
6.11 Attach the access panel cover to the Dterm II main body.
6.12 Connect the line and handset cords to the Dterm II.
6.13 Plug the modular line cord from the Autodialer into the RJ-35X receptacle.
6.14 Plug in ac adapter:
A. Plug the ac adapter into the Autodialer.
6. Plug the other end of the ac adapter into a local 1 lo-120V ac outlet.
6.15 Test the Autodialer and the Dterm telephone for normal operation.
5OF5