NEC nd-20292 manual Port to Hunt Group, EXT300, Hunt Tandem Port Asgn

ND-20292

CHAPTER 3

APRIL, 1990

MEMORY		BLOCK	4E9	- TANDEM	PORT TO	HUNT	GROUP	ASSIGNMENT	--3,
									-9
		OPERATION		1	AND	-		DISPLAY
1.	Go off line.					OF F	- LINE	(X.Xx)
						PROGRAM		MODE
2.	Depress	F4, then	FlO.		TLI		PROGRAMMING

3.Depress F19.

4.Enter the extension number to be assigned to the Tandem Port Hunt Group. Example: 300. (See Notes 2,6, & 7).

5.Enter the Tandem Port Hunt Group number to be assigned to the chosen port (1 - 8). Example: Hunt Group 2.

6.Depress ENTER key. (See Note 9).

TANDEM	PORT		ASGN
EXT???
TANDEM	PORT		ASGN
EXT300	-	HUNT.		G?
TANDEM	PORT		ASGN
.EXT300	-	HUNT.		G2
				‘,
TANDEM	PORT		ASGN	.’
EXT???

7.Repeat Steps 4 and 5 to assign all Tandem Ports required.

8.Depress SPKR key to go back on line.

300 - 234