NEC nd-20292 manual Modify Display System Control Enter Menu no

ND-20292

CHAPTER 7

APRIL, 1990

The options and key in numbers are:

1 - Down Load			5	- Display
2-UpLoad			6	- Print Out
3	- Verify		7 - System Data Clear
4	- Modify		10 - System Control
NOTE:		Key in numbers 8 and 9 are not used.

Selecting any of the options above (except System Control) results in the display of a second menu.

0With the Main Menu displayed, depress the number of the desired function and press CR (RETURN) key.

750.9.1General Explanation of LCR Main Menu Options

1.Down Load

The Down Load option is used to transfer data from the floppy disk to the LCR-E ETU. It should not be confused with normal loading which is from the floppy disk to the computer. This option is generally used after data has been changed on the floppy disk. No change to the actual working memory on the LCR-E ETU occurs until this procedure is completed.

2.Up Load

The Up Load option is used to transfer data from the LCR-E ETU to the floppy disk. This option is generally used to retrieve the actual programmed data presently in the LCR-E ETU. This might be done to check the actual contents of the LCR-E ETU.

3.Verify

The Verify option is used to compare the contents of the LCR-E ETU to the contents of the floppy disk. This option is used after a down load or up load to verify that the transfer of data just completed was completed properly and no problem was encountered that was not caught by the computer. Also this option can be used to check that a floppy disk contains the latest program presently in the LCR-E ETU.

4.Modify

The Modify option is used to change the data in the floppy disk. This option is the main function used by the programmer in customizing the LCR program. It should be noted that this option changes only the data in the floppy disk, not in the LCR-E ETU.

SAMPLE LCD INDICATIONS

***LCR MAIN MENU***

1 DOWN LOAD 6 PRINT OUT

7 SYSTEM DATA CLEAR

f ;!RtiAD
4 MODIFY	t
5 DISPLAY	10 SYSTEM CONTROL
ENTER MENU NO	141

700 - 34