NEC nd-20292 manual ADA-E Unit Stock # Phonebeam Speakerphone with IR2 adaptor

TRONICS PHONEBEAM SPEAKERPHONE

CONNECTION TO DTERM SERIES II TERMINALS

ETI NUMBER: DT-006 DATE: JUNE 1989

1.DESCRIPTION

This Engineering Technic&lnformation (ETI) Bulletin describes the steps necessary to install an ADA-E (Ancillary Device Adaptor) into an ETE-6D-0, ETE-16D-0, ETE-16-0, ETE-6-0, or ETE-16K-1 Multiline Terminal, for the connection and operation of a Plantronics Phonebeam Infrared Speakerphone.

2:LIMITATIONS

2.1With a Phonebeam Speakerphone connected and operating normally, lifting the handset on the

Multiline Terminal provides a dual connection to both the speakerphone and the handset; the speakerphone does not automatically switch off.

2.1.1To converse using the Multiline Terminal handset only, the speakerphone must be turned off.

2.1.2To converse using the Speakerphone only, the Multiline Terminal handset must be on-hook.

3.PARTS REQUIRED

3.1ADA-E Unit (Stock # 700340).

3.2Phonebeam Speakerphone with IR2 adaptor.

4.REFERENCES

4.1Plantronics Installation Manual.

4.2Dterm Series II Multiline Terminal Users Guide or Electra Mark II Multiline Terminal User’s Guide.

5.OPERATION

5.1Initiating Calls.

5.1.1Go off-hook with the Mutiline Terminal handset (Phonebeam Speakerphone turned off),

OR

5.1.2Depress the ON key of the Phonebeam Speakerphone (Multiline Terminal handset on- hook),

OR

51.3Switch the remote microphone unit of the Phonebeam Speakerphone to the ON position (Multiline Terminal handset on-hook).

1 OF7