NEC nd-20292 manual ‘-r

440.6Trunk to Trunk Transfer

1.With CO/PBX/Tie Line/DID call in progress:

0 Depress the FLASH key (or momentarily depress the hookswitch); call is on consultation hold.

0Dial trunk access code (default: 9,8,70-75) and desired number.

0Receive ringback tone and wait for called party to answer.

0When party answers, restore handset.

NOTE 1: Both trunks involved in the transfer must be capable of

providing remote call disconnect signals and must be programmed accordingly.

NOTE 2: Transfers will not be completed if the transferred call is not answered or before the talk start timer has elapsed (default is

18seconds ).

2.When second trunk is a CO/PBX line and the called station is busy or unattended:

With outside call in progress:

l Depress the FLASH key (or momentarily depress the hookswitch); call is on consultation hold.

l Dial trunk access code (default: 9,8,70-75) and desired number.

400 - 148

I.Y-I”I”I

CHAPTER 4

APRIL,1990

Receive busy tone or no answer, before the talk start timer times out, (default 18 sees.) depress the FLASH key (or momentarily depress the hookswitch) or restore the handset.

Second call is released and first call recalls.

OR

Depress the FLASH key (or momentarily depress the hookswitch) after the talk start timer times out.

Transfer is completed.

Restore handset. ,,;

3.When second trunk is a Tie line and the called station is busy or unattended:

With outside call in progress:

Depress the FLASH key (or momentarily depress the hookswitch); call is on consultation hold.

Dial trunk access code (default: 9,8,70-75) and desired number.

Receive busy tone or no answer.

Depress the FLASH key (or momentarily depress the hookswitch) or restore the handset.

Second trunk is released and first call recalls.

‘. ,.

:

‘-r i.. /’