NEC nd-20292 manual Home NPA Code Table Print OUT Start Normal END

ND-20292

CHAPTER 7

APRIL, 1990

6.Print Out Mode

The option of obtaining a hard copy of the table data is made available using the PRINT OUT Menu selected from LCR Main Menu. The data printed out is the information presently stored on the floppy disk. The following steps allow the programmer to obtain a print out of any table data.

With the LCR Main Menu in the display, depress 6, then depress CR (RETURN). The display shown is provided:

SAMPLE LCD INDICATIONS

***PRINT OUT***

1 AREA CODE TABLE 6 EXTRA CODE TABLE

2 WEEKLY SCHEDULE 7 OFFICE CODE TABLE

3 DAILY SCHEDULE 8 HOME NPA CODE

4 ROUTE ADVANCE

5 ROUTE TABLE

ENTER MENU NO. [7

Select the number of the desired table, then depress CR (RETURN). The example shows the display provided if option 1 (Area Code) is selected.

If 7 (OFFICE CODE TABLE) is selected, two additional steps are required.

With the PRINT OUT MODE in the display, depress 7, then CR (RETURN). The display to the right is provided.

0 Input the starting table number and CR (RETURN).

0 Input the end table number and CR (RETURN).

AREA CODE TABLE PRINT OUT START

***OFFICE CODE TABLE PRINT***

TABLE NO. FROM 0

***OFFICE CODE TABLE PRINT***

TABLE NO. FROM 100 TO q

NOTE 1: The display is an example of area code data being printed out from the floppy disk. The blocked off area is replaced with the name of the table chosen, but otherwise looks the same for all other selections.

NOTE 2: Depress CR (RETURN) to go back to the

Print Out display.

If no problems are encountered during the printout process, the display to the right is shown.

HOME NPA CODE TABLE PRINT OUT START

NORMAL END 4

700 - 54