NEC nd-20292 manual System Data Clear

If a problem is encountered during the printout process, the display to the right is shown.

NOTE 1: In the example, the blocked off area is replaced with the name of the table selected.

NOTE 2: Refer to the table of errors (elsewhere in this chapter) for further guidance if a problem is encountered.

NOTE 3: Using the ESC key returns the display to the LCR Main Menu from the Print Out Menu.

7.System Data Clear

When major changes to the floppy disk data are required, the option is provided at the LCR Main Menu to clear out data on a table basis. The following steps provide the procedures for using this option,

With the LCR Main Menu displayed, depress 7, then depress CR (RETURN). An example of the display is shown to the right.

Enter the number of the table to be cleared and depress CR (RETURN). The example shows the display for selection 1 (area code table clear).

If no problems are encountered during the clearing process, the display shown to the right is provided.

If a problem is encountered during the clearing process, the display to the right is shown.

Depress the CR (RETURN) key to go back to the System Data Clear Menu.

ND-20292

CHAPTER 7

APRIL, 1990

SAMPLE LCD INDICATIONS

HOME NPA CODE TABLE PRINT OUT START ABNORMAL END 4

ENTER MENU NO. [7

AREA CODE TABLE DATA CLEAR START 0

AREA CODE TABLE DATA CLEAR START

NORMAL END 4

AREA CODE TABLE DATA CLEAR START

ABNORMAL END

FDD I/O ERROR tJ

700 - 55