NEC nd-20292 manual As 1 digit

NIJ-IUZYI

CHAPTER 4

APRIL, 1990

SAMPLE LED INDICATIONS SAMPLE LCD INDICATIONS

NOTE 2: When changing trunk access code and telephone number to be stored, skip step d, and perform steps e, f, g and h.

NOTE 3: A maximum of 7 characters can be entered for name.

NOTE 4: A maximum of 16 digits can be entered for a telephone number.

NOTE 5: When a system speed dial number has to be entered into a speed dial buffer, enter a trunk access code, depress ANS key (instead of dialing #) and enter a system

dial buffer number (20-99). If a pause is required anywhere in the dialing of the

number, depress the TRF key (each depression counts as one of the 16 digits).

NOTE 6: Hookflash (RECALL			key) signal		can be
programmed	as the	first digit		of	a Speed
Dial number.	Hookflash		counts	as 1 digit.

2.To Verify

l Select page as described in Section 450.2.

l Depress desired DSS key; contents of station speed dial will be shown for 10 seconds.

3.To Clear

a Select page as described in Section 450.2. ,,

CNF LED flutters.

b.Depress CNF key.

SPD	TRK	AC73
5167537000		P A IT I,
C H A R 1, E S

400 - 170