NEC nd-20292 manual Selection of up load mode results in the menu display shown

ND-20292

CHAPTER 7

APRIL, 1990

1.Down Load Mode

• Selection of down load mode results in the menu display at right.

At this time selection of one of the available table numbers will result in the following display.

a Example for area code down load: Depress 1, then depress CR (RETURN).

NOTE 1: The display shown is an example of area code data being down loaded from the floppy disk into the LCR-E. The name of the table chosen will be shown in the display.

NOTE 2: Exceptions to note 1, are the office code table and all data down load selections. These two selections, due to their large memory requirements show darkened boxes to indicate the relative amount of data that has been transferred.

NOTE 3: If no problem is encountered during down load, the display shown (or one similar to it)

is provided. Depression of the CR (RETURN) key is required to return to the Down Load Menu.

NOTE 4: If a problem is encountered during down load, the display shown (or one similar to it)

is provided. Depression of the CR (RETURN) key is required to return to the Down Load Menu.

NOTE 5: It is recommended that the RS-232C cable between the LCR-E ETU and the computer be checked prior to doing a down load or up load.

2.Up Load Mode

• Selection of up load mode results in the menu display shown:

	SAMPLE LCD	INDICATIONS
	***DOWN	LOAD***
1 AREA CODE TABLE		6 EXTRA CODE TABLE
2 WEEKLY SCHEDULE		7 OFFICE CODE TABLE
3	DAILY SCHEDULE	8 HOME NPA CODE
4	ROUTE ADVANCE	10 ALL DATA
5	ROUTE TABLE

ENTER MENU NO. q

AREA CODE TABLE DOWN LOAD START 0

I

OFFICE CODE TABLE DOWN LOAD START

ALL DATA UP LOAD START

AREA CODE TABLE DOWN LOAD START

NORMAL END 4

AREA CODE TABLE DOWN LOAD START

ABNORMAL END

LINE TROUBLE

	***UP LOAD***
1 AREA CODE TABLE		6 EXTRA CODE TABLE
2 WEEKLY SCHEDULE		7 OFFICE CODE TABLE
3	DAILY SCHEDULE	8 HOME NPA CODE
4	ROUTE ADVANCE	10 ALL DATA
5	ROUTE TABLE

1 ENTER MENU NO. q

700 - 36